Category: DIY
-
Oversized Sprinter Shower Build
I wanted a shower big enough for a guy my size to use in comfort when on trips in the Sprinter. I researched and could not find a shower pan with the correct dimensions and corner drain. I decided to design a custom shower pan and build out a shower to suit me. More details…
-
Upgrade Dash Speakers on your T1N Sprinter
The reality is the dash speakers on our 2006 Dodge Sprinter are long gone and needed to be replaced so that I could actually understand the words from the radio lol. I decided to upgrade using some very inexpensive speakers that seem to be doing just fine for now. Supplies that I used: Pioneer Speakers:…
-
Add USB Charger Port to your T1N Sprinter Dash
I recently purchased a 2006 Dodge Sprinter and quickly notice that there was no USB port lol. I decided to mount the Blue Sea 4.8 USB dual port outlet on the dash. Supplies that I used: Blue Sea Dual USB Charger: https://amzn.to/36DWJim Wirefy 270 PCS Heat Shrink Wire Connector Kit: https://amzn.to/2EVrGUN Wirefy Crimp Tool: https://amzn.to/3kl7FqV…
-
Sprinter Two Person Bench Seat
Recently in my van build I decided that having a place for my workstation would require some sort of seating option. My first thought was that I would build a small bench to sit at and maybe create some storage under it. As in most of my time lately I have been browsing the internet…
-
Installing OEM Sprinter Roof Rails! – DIY Guide
Roof rails are a handy addition to any Sprinter but not all vans were ordered with the rails factory installed. Below is a How-To article on installing the factory roof rails so you can mount any number of items to your roof. Our rails will ultimately be used to attach a roof rack to the…
-
Sprinter Van Bed Platform Build
Just like everyone else building out a van we want to always make sure we build what works for us. This being my third Sprinter I have figured out the bed situation. This same setup has worked great for us in our other Sprinter build so we will do it again. It is a bit…
-
Sprinter Passenger Van Roof Top AC Removal and Conversion to Maxxfan Powered Vents
Why Remove the Factory AC Unit? The Factory roof top AC unit on the Sprinter is engine powered by its own compressor and designed to keep the interior cool when loaded with passengers. Unfortunately the unit will not function with the engine off and it’s worthless while camping. It also eats up a lot of…
-
LED Eyeball light Install – Map light, Reading light or keep the kids entertained while traveling at night!
I decided in install an adjustable LED eyeball light over my son’s seating position so he can have light at night without disturbing us up front. Often when traveling at night he wants a light so he can play with his toys etc. These lights would also be great above the bed for reading, above…
-
Low Profile, Touch Activated and Dimmable LED Ceiling Lights – A Detailed Install Guide
We are currently in the middle of converting our 2017 4×4 Sprinter from a passenger van into a camper and it’s time to choose the lighting that will be installed in our custom built ceiling panels. On the recommendation of a friend we decided to use Genuine Marine low profile LED lights. These lights have…
-
2024 170 EXT AWD – Hester
2023 Sprinter build. This van is being converted to have rear outdoor shower, galley, sitting area as well as other features.